Click image to view full size image
Description
Our slip ring designs are made to meet demanding of operation lamp, and sufficiently solve technical problems which avoiding electrical equipment wire winding while 360 degree limitless rotation.
Features
◆ Transfer all kinds of high definition video signals
◆ Compact design
◆ Convenient to assembly
◆ Maintenance-free
◆ Operating smoothly and reliability
◆ Extremely low electrical noise
◆ Combine signal and power transmission
◆ Precious metal contact makes the lifetime over-long
Options
| ◆ Operation speed, current &voltage | ◆ Signal type of high definition |
| ◆ Connector | ◆ Housing material |
| ◆ No. of circuits | ◆ Position of wire outlet |
Electrical Parameters
| Number of Ring | 10 ring or according to the actual demand |
| Rated Current | 12A/ring,3rings; 2A/ring, 5rings; 2 video rings |
| Rated Voltage | 0~380VAC/240VDC |
| Dielectric Strength | 500VAC@50Hz,60s |
| Insulation Resistance | 500MΩ/500VDC |
| Electrical Noise | ≤0.01Ω |
Machinery Technology Parameter
| Operating Speed | 0~10rpm |
| Working Temperature | -20℃ - +80℃ |
| Working Humidity | ≤75% |
| Contact Material | Precious Metal |
| Structure Material | Engineering Plastics |
| IP Rating | IP 51 |
Outline dimesion unit
Installation Guide
1.Position the slip ring in the desired location and tighten four screws to shaft.
2.Route the wiring and make the necessary connections,fasten the anti-rotation tab.
Attentions
1.Slip ring can not support the weight of equipment which connects with it, roating equipment should be fastened
so that its weight will not fall on the rotor.
2.Slip ring should be used in dry,low dust environment.If used outdoor,shield is necessary.
3.The surface of lead wire should avoid being damaged while equiment rotating,all lead wire can not bear
weight while you put the lead wire in order.
4.No damaging the surface of lead wire while barking its end.